Car Mods: 1st Gen Perodua Myvi Tuning Part V - Lightweight Crankshaft Pulley and some Iridium

Okay, let's return to some 1st Generation Perodua Myvi tuning. The 2010 car is now slightly over 35,000km old and still running as it should. It just undergoes regular oil changes and if you note from the earlier posts, the car has had some suspension, brakes and an air filter / cold air intake mod.

The Myvi technically stops faster, corners better and is a little more refined due to the strut bar / rear beam axle anti-roll bar which allows the suspension to be less susceptible to flex. And with those mods, a little more performance from the engine would be nice. So I've basically got a lightweight aluminium crankshaft pulley installed (the polished thingy to the right of the brakes).

Car Mods: 1st Gen Perodua Myvi Tuning Part III - The Brake Upgrade

This article has taken its sweet time hasn't it? One reason why this has taken so long is that I decided to thoroughly sort the braking issue completely before I come to any conclusion. And the little Perodua Myvi 1.3 that the Missus uses now has really, really, really good brakes.

More Perodua Myvi 1.3 Tuning On The Way....

Those that follow this blog via Facebook would have seen the picture above two weeks ago. So technically one should click on the 'Like' button if one wants to see new stuff slightly ahead of time.

Stay tuned people. More 1st Generation Myvi tuning coming up. Anyway, part 1 is here. Part 2 is here for those who are lazy to search through the whole blog.

Car Mods: 1st Gen Perodua Myvi Mod Tips Part II

And to start off the month of February we take another look at what can be done to one of the most common car in Malaysia - the Perodua Myvi. Note that if you owned one or intend to own one, you would be similar to a whole lot of Malaysians who own different variants of it (probably hundreds of thousand people including yours truly) and there is nothing really unique about it even if you spend thousands of Ringgit on it. So what you need to do is make it more drive-able instead of focusing too much on cosmetics. That's what I would do to a car that is really common - a nice compact supermini, with decent packaging and ample poke for the highways (but again I state, its no sports car).

Car Mods: 1st Gen Perodua Myvi Mod Tips

I suppose this article is a tad bit late as Perodua has already launched the second generation Myvi. But then again, I have news for you. There is actually no difference betweeen the old 1^st generation Myvi 1.3 and the new Myvi 1.3 beneath the new bodyshell, new floating type dashboard and the electrically assisted power steering that supposedly helps the engine make 4 more horses (quite true, but slightly off as the Myvi actually came with an improved cylinder head when it was facelifted – giving more torque lower down and one or two horses but this was not mentioned at all. Why? Who knows.) I should know as my mother in law just bought one and I don't seem to think that there is a big difference compared to the pink one pictured herein after a hard drive up to Genting Sempah using the old Bentong Road (lots of body roll, lots of holding on to the steering wheel for support).

Anyway, you now have a 1^st generation 1.3 Myvi from 2005- mid2011. How do you improve the performance of a Myvi? You sell it and buy yourself a Proton Inspira 2.0. No? You're stuck with it for the next five years at the very least because you took a nine year loan that only breaks even in four and a half years? Okay. Aside from being suicidal as you're stuck with a tall, skinny tyred town car for the next five or so years your options are limitless. Remember, this is Malaysia. Everything that you want to do to it can be done. The only thing that would limit you is money. The lack of it.